Spectrophotometric Determination of Zirconium in Monazite Sand

A sensitive spectrophotometric method was developed for the determination of zirconium in monazite sand. The zirconium ion was previously separated from the other interfering elements by a 0.5 M thenoyltrifluoroacetone (TTA)-xylene extraction, then determined with Arsenazo III in 9 M HCl medium. Zirconium reacted with Arsenazo III to form an emeraled green coloured complex having maximum absorbance at 665 nm in 9 M HCl medium. The color was stable for at least 2 hours. Effects of time, HCl concentration, gelatine and various ions have been studied. The system confirms the Beer's law over the concentration range investigated. Optimum condition range for measurement in 1.0 cm quartz cell is 0.1–0.5 μg/ml of zirconium. The molar absorptivity is 1.51×10⁵ liter mole^?1 cm^?1. The metal-ligand ratio of 1:4 was confirmed by Job's Continuous Variation method and the conditional stability constant of Zirconium-Arsenazo III Complex in 4 M HCl and 9 M HCl were also determined by this method.     

Electrospun cellulose acetate fibers: effect of solvent system on morphology and fiber diameter

This paper reports an investigation of the effects of solvent system, solution concentration, and applied electrostatic field strength (EFS) on the morphological appearance and/or size of as-spun cellulose acetate (CA) products. The single-solvent systems were acetone, chloroform, N,N -dimethylformamide (DMF), dichloromethane (DCM), methanol (MeOH), formic acid, and pyridine. The mixed-solvent systems were acetone–DMAc, chloroform–MeOH, and DCM–MeOH. Chloroform, DMF, DCM, MeOH, formic acid, and pyridine were able to dissolve CA, forming clear solutions (at 5% w/v), but electrospinning of these solutions produced mainly discrete beads. In contrast, electrospinning of the solution of CA in acetone produced short and beaded fibers. At the same solution concentration of 5% (w/v) electrospinning of the CA solutions was improved by addition of MeOH to either chloroform or DCM. For all the solvent systems investigated smooth fibers were obtained from 16% (w/v) CA solutions in 1:1, 2:1, and 3:1 (v/v) acetone–DMAc, 14–20% (w/v) CA solutions in 2:1 (v/v) acetone–DMAc, and 8–12% (w/v) CA solutions in 4:1 (v/v) DCM–MeOH. For the as-spun fibers from CA solutions in acetone–DMAc the average diameter ranged between 0.14 and 0.37 μm whereas for the fibers from solutions in DCM–MeOH it ranged between 0.48 and 1.58 μm. After submersion in distilled water for 24 h the as-spun CA fibers swelled appreciably (i.e. from 620 to 1110%) but the physical integrity of the fibrous structure remained intact.     

Studies on metal — protein interactions: Inter-comparison among various approaches

Binding ability of mercury, thallium, lead and bismuth with Erythrina variegata seed protein have been investigated using tracer packet technique. Due to the lack of standard methods, inter-comparisons have been made among three different approaches, like trichloroacetic acid (TCA) precipitation, isoelectric precipitation and dialysis of protein after incubation with the metals. Good agreement was observed for all the cases except that of lead.     

Flammability studies of 3-methyl pyridine/water system

In industrial processes, information on the safety property of chemicals is essentially crucial for safe handling during unit operations. Ensuring the safe use of combustible or flammable substances in processes is unlikely without detailed investigations of their flammability characteristics and related hazards. We studied 3-methyl pyridine (3-picoline), e.g., flammability limits (LFL/UFL), maximum explosion pressure (P _max), maximum explosion pressure rise (dP/dt)_max, minimum oxygen concentration (MOC), vapor deflagration index (K _g), and characterized the influence of inert steam (H₂O) on critical parameters for 3-picoline/water mixtures at 270°C, 1 atm, various oxygen concentrations, and vapor mixing ratios (100/0, 30/70, 10/90 and 5/95 vol.%) with a 20-L-Apparatus in simulated conditions, respectively. The results showed that the flammability characteristics of 3-picoline_(aq) all increased with the oxygen concentration. However, as the composition of inert steam increased, the flammability parameters and the degree of fire and explosion hazards were significantly reduced, instead. This study elucidated the flammability properties of 3-picoline mixed with inert steam. The conclusions could be applied to proactively prevent the relevant processes from incurring fire and explosion accidents.     

Optical measurement of the deformation of giant lipid vesicles driven by a micropipet electrode

We investigate the deformation of giant lipid vesicles driven by a micropipet electrode by use of differential confocal microscopy. This optical technique provides nanometer depth resolution without mechanical contact and hence prevents large tension or perforation of the soft membrane. For dipalmitoyl phosphatidylcholine (DPPC) membranes in the gel phase, we observed deformations of several hundreds of nanometers when the driving voltage was about 0.1 V. The voltage and frequency responses of the vesicle deformation can be explained by the balance between the electroosmotic force inside the micropipet and the membrane tension. We also used DPPC:cholesterol vesicles to check the validity of this model. In the fluid phase, however, the deformation is independent of the modulation signal because micrometer-scale thermal fluctuations dominate the membrane motion.     

Mammalian cell growth studiedin situ by fourier transform infrared spectroscopy

Fourier transform infrared techniques were used to monitor mammalian cell growth plated on attenuated total reflection (ATR) crystals. Consistently, the growth kinetics plots generated from the obtained spectra demonstrated a sigmoidal curve representing a sequence of slow, rapid, then tapering cell growth which correlated well with non-spectral cell growth determinations. Significant advantages over traditional methods of measuring cell growth kinetics are demonstrated. The technique has promising potential to be used to study events in areas such as toxicology and cell biology.     

Analysis of double-stranded DNA by microchip capillary electrophoresis using polymer solutions containing gold nanoparticles

The impact of gold nanoparticles (GNPs) on the microchip electrophoretic separation of double-stranded (ds) DNA using poly(ethylene oxide) (PEO) is described. Coating of the 75-microm separation channel on a poly(methyl methacrylate) (PMMA) plate in sequence with poly(vinyl pyrrolidone), PEO, and 13-nm GNPs is effective to improve reproducibility and resolution. In this study, we have also found that adding 13-nm GNPs to 1.5% PEO is extremely important to achieve high resolution and reproducibility for DNA separation. In terms of the stability of the GNPs, 100 mM glycine-citrate buffer at pH 9.2 is a good buffer system for preparing 1.5% PEO. The separation of DNA markers V and VI ranging in size from 8 to 2176 base pairs has been demonstrated using the three-layer-coated PMMA microdevice filled with 1.5% PEO containing the GNPs. Using these conditions, the analysis of the polymerase chain reaction products of UGT1A7 was complete in 7 min, with the relative standard deviation values of the peak heights and migration times less than 2.3% and 2.0%, respectively. In conjunction with stepwise changes of the concentrations of ethidium bromide (0.5 and 5 microg/ml), this method allows improved resolution and sensitivity for DNA markers V and VI.     

Double-Label Simultaneous Time-Resolved Fluoroimmunoassay of Phenytoin and Phenobarbital

A procedure for the simultaneous time-resolved fluoroimmunoassay for phenobarbital and phenytoin, based on the use of europium- and samarium-labeled haptens, has been investigated. These lanthanide ions are bound to the haptens by means of the anhydride of diethylenetriaminepentaacetic acid. The antibody is immobilized onto immunoplate in which samples are assayed in competitive immunoassay. After the immunoreactions and dissociation with a fluorescence enhancement solution, the fluorescence intensity is measured. The detection limits of the assay are, respectively, 20 ng/ml for phenobarbital and 50 ng/ml for phenytoin. Results obtained with the proposed methods correlate well (CV <10%). The inter-reactions between phenobarbital, phenytoin, and their antibodies are studied.     

Shear and NMR experiments of materials with flow behaviour depending on the deformation history

Oxide ceramic masses react to simple shearing with hardening (peptisation: increase in the shear stress with the shear deformation). In the present study the correlation between the increase in the shear stress and the porosity, agglomeration processes and the type of flow are analysed. For this purpose oxide ceramic masses are tested in a shear device especially developed for pastes and analysed by rheometric experiments, NMR methods and particle size analysis. The results support the hypothesis that structural changes (hardening, increase in the mean porosity) of the material during the peptisation mainly depend on the magnitude and not on the kind of the energy input and thus of the type of flow. The fraction of bound (more generally, the immobilised) water increases with the shear displacement. Also crushing of primary particles could be observed. Both the crushing of solid particles causing an increased solid surface and the formation of a three-dimensional gel structure are microscopic effects capable of resulting in the binding or retaining water. On a macroscopic scale these phenomena cause hardening. Magnetic resonance imaging visualises flow-induced agglomerates, which form owing to the shear flow and increase the porosity averaged over the whole sample. After the shear experiment rolls of paste can be seen which indicate that the general assumption of a plane shear flow in the shear device is not warrantable. Received: 19 July 2001 Accepted: 25 October 2001     

Voltammetric study of copper(I) thioacetamide complexes

Summary The composition and stability of copper(I) complexes with thioacetamide (TAA) have been evaluated with the help of square-wave voltammetry using the fast pulse technique. Two species, namely Cu(I) (TAA) and Cu(I) (TAA)₂, have been identified having the formation constants log ₁=16.85; log ₂=18.03. The complex is stable in highly acidic medium (pH1). The application for the determination of copper is pointed out.